Hey there! Got a SIG Nightmare Carry? Great choice! This guide is all about getting your gun to shine. Whether it’s fixing those little issues, keeping it spotless, or ensuring it’s always battle-ready, we’ve got you covered.
Running into issues with magazines or the grip safety feeling off? Or maybe your aim’s a bit off? No problem at all, we’ve got all the advice you need. From sorting out magazine hassles to fine-tuning your grip safety and acing those cold-weather shots, today we’re here to help.
Want to keep your SIG looking and working like new? We’ve put together an easy table that covers everything—what ammo it prefers, how often to oil it, and more.
So, ready to hit the range or carry with confidence? This guide is here to ensure your SIG Nightmare Carry is up for anything.
Let’s jump in and leave those troubles behind!
Typical Issues and Fixes for the Sig Nightmare Carry
| Problem | Easy Fix |
| Magazine Issues | Try different magazines and change the recoil spring if you’ve shot 1,000 to 2,000 rounds. |
| Grip Safety Issues- Too Sensitive or Stiff | Adjust the spring behind the grip safety. Make it tighter or looser as needed. A gunsmith can help make it just right. |
| Trouble Ejecting Shells | Keep the extractor clean and check it often. If it looks worn out, it’s time for a new one. Make sure the ejector is straight, too. |
| Cold Weather Issues | Use special oil for cold weather. Also, keep the gun clean to stop moisture from freezing up parts. |
| Hard to Get a Good Holster | Look for holsters made just for the SIG Nightmare Carry. They fit perfectly and keep the gun secure and hidden. |
| Trigger Problems | Take the gun apart and smooth out the trigger parts. Or let a gunsmith do it to make sure it’s safe and feels nice. |
| Hammer Issues | Check parts like the sear and hammer strut. If they’re worn, swap them with better ones. Keep an eye on these parts for wear. |
| Slide Stop Lever Problems | Clean around the slide stop lever to remove any gunk. If it’s still not working, you might need a new one. |
| Safety Issues | Regularly look over the safety parts like the mainspring housing and firing pin safety. Keep them clean and in good shape. |
| Aiming Problems | Adjusting sights can be tricky. Use the right tools, or switch to sights that are easier to adjust. |
| Slide Moving Issues | An adjustable slide stop can fix too much slide movement. It helps the gun last longer and shoot better. |
| Front Sight Gets Loose | Tighten the front sight with a special glue so it doesn’t move. Or get a pro to make sure it stays put. |
Breaking Down Common Issues and Their Solutions in Detail
Magazine Issues
Ever notice, right when you’re on your last shot, the slide doesn’t lock back like it should? Or when you try to check the chamber with an empty mag and the slide won’t stay put? It’s pretty annoying.
This usually happens when the magazine isn’t a perfect match for the gun or the recoil spring is just worn out from all the shooting.
Solution
To sort out magazine problems, try using ones from reputable brands. A magazine that fits your SIG just right can improve how your gun performs, similar to how comfy shoes make walking easier.
Next, focus on the recoil spring. This part works hard every time you shoot. If you’ve fired 1,000 to 2,000 rounds, the spring might not be as bouncy as before. Changing it for a new one can make your gun feel new again. Paying attention to both the magazine and recoil spring helps keep your SIG Nightmare Carry working smoothly.
Trust me, keeping an eye on these two can really keep your SIG Nightmare Carry feeling quick on its feet and ready to go.
Grip Safety Sensitivity
Ever deal with a SIG where the grip safety is either too sensitive or too stiff? It’s pretty rare, but it can be annoying, especially when you’re trying to shoot fast or you’re feeling a bit stressed.
It’s not something you run into every day, but when you do, it can be a bit annoying, especially if you’re trying to shoot quickly or under pressure.
Solution
It’s usually about tweaking the spring tension. If the safety kicks in too fast, a tighter spring adjustment might fix it. But if it’s too tough to press, loosening the spring is probably what you need. Though adjusting sounds simple, finding that just-right spot is crucial for both comfort and reliability.
Stuck on adjusting? A skilled gunsmith can help. They’ll fine-tune the spring tension so your grip safety works perfectly, ensuring it’s reliable and lets you focus on hitting your target.
Failure to Eject
So, you’re shooting and feeling great, but then a shell doesn’t come out. It’s super annoying and messes up your rhythm.
Often, it’s because the extractor (the part that kicks out the shells) is dirty or old. It’s like it’s not even trying, and that’s why the shell sticks.
Solution
First, clean the extractor. Dirt can stop it from grabbing shells properly.
If it’s still not working after a clean, it might be worn down. It’s like the extractor can’t hold onto the shells well anymore, and you might need a new one.
Also, check the ejector. It’s the part that pushes the shell out after the extractor pulls it. Make sure it’s in good shape and straight.
Keeping the extractor and ejector clean and in good working order helps a lot. If things still aren’t smooth, a gunsmith can sort it out, getting you back to shooting without hassle.
Cold Weather Issues
Ever seen your SIG Nightmare Carry get slow in the cold? Guns don’t really like being cold. The oil gets thick, like syrup does, and that makes everything move slower.
Also, the metal bits can get a little smaller when it’s cold. It’s not a big change, but it can make shooting a bit harder.
Solution
When it’s so cold outside you can see your breath, keeping your SIG firing smoothly takes a little extra care.Use an oil that’s made for cold weather. This kind of oil stays thin and keeps everything moving smoothly inside your gun, even when it’s freezing.
Also, keeping your gun clean from moisture is super important when it’s cold. Moisture can freeze and make parts of your gun stick together, or even cause rust. A clean, dry gun with the right oil won’t have trouble in the cold.
So, using cold-weather oil and making sure your gun is dry and clean means your SIG will work great, even on the coldest days. This lets you focus on your shooting, not worrying about your gun freezing up.
Holster Compatibility
Got a SIG Nightmare Carry? Cool. But here comes the hard part – finding a good holster.
You need one that feels good to wear and keeps your SIG right where you need it. Sounds simple, but finding that perfect match can be a real hunt.
Solution
Going custom could be your best bet. It sounds fancy, but really, it’s super practical.
But it’s not all about the fit. These custom holsters are designed for discreet carry, quick drawing, staying hidden, and keeping you comfy all day. Plus, you get to choose from awesome materials, from classic leather to sleek, modern options.
Why not check out custom holsters? A bit of searching and you might just find the perfect match for your SIG, making your carry experience better than ever.
Trigger Issues
If you face issues like when you pull SIG’s trigger and it feels all rough and looking for a solution. Welcome, you are in the right spot.
That rough feel can mess with your aim and isn’t nice. Usually, the trigger bits just need some smoothing or oil. It happens a lot but can really take away the fun of shooting.
Solution
Let’s fix that rough trigger. It starts with taking care of the trigger parts inside your gun. Opening up your gun to get to the trigger can be a bit tricky, but it’s necessary. Once you’re in, use some fine sandpaper to smooth out any rough spots. This helps everything inside work better together.
Next up, oil it. Putting some good gun oil on the parts after sanding helps them move smoothly and stops them from wearing out too quickly.
Not too sure about doing this by yourself? That’s totally fine – a gunsmith can sort it out for you. They know exactly how to get your trigger feeling smooth and just right.
Hammer Issues
Have Ever noticed your gun’s hammer doesn’t want to stay back? That’s “hammer follow” for you. It’s not just annoying, but it can also be a bit dangerous.
Often, it means parts inside your gun, like the sear or hammer strut, are worn out or not set right.Think of it as having loose parts inside; it just doesn’t run smoothly.
Solution
Here’s a straightforward way to do it.
First, you’ve got to open your gun to reach the trigger parts. It might feel tricky at first, but it’s necessary. Once you’re in, grab some fine sandpaper. Lightly sand any rough spots you find on those trigger parts. This sanding step helps all the parts work together more smoothly.
After sanding, it’s oiling time. Apply some good gun oil to the parts you’ve sanded. This oil makes the parts move easier and protects them from wearing out fast.
Thus, you can turn a rough trigger into a smooth one. A smooth trigger improves your shooting experience, making it more enjoyable.
Slide Stop Lever Problems
Has the slide stop lever on the gun been acting strange? It could be moving when it’s not meant to or not locking the slide back properly. It disrupts the harmony between shooter and firearm.
Here is a quick fix to get back the previous performance.
Solution
Start with a good cleaning. Dirt or old oil often causes trouble. A clean might get it moving properly again.
Still stuck? It might need adjusting, kind of like tuning a gadget. If it’s worn or not working right, time for a new one. Choose an original SIG part or a good aftermarket one that fits your gun perfectly.
Keeping the slide stop lever clean or replacing it when necessary helps keep your gun working right. Paying attention to this detail means your gun is ready to shoot smoothly, anytime.
Safety Issues
Keeping your SIG Nightmare Carry’s safety features in check is a must. Nobody wants a surprise shot because a safety bit didn’t work.
Paying attention to the mainspring housing and firing pin safety is super important. They’re there to prevent accidents.
Remember, these parts might wear out or break after lots of use.
Solution
Always check your gun’s safety parts regularly. Cleaning isn’t just to make it look good, it’s about keeping all the important safety bits in order too.
If you ever feel like something’s off, or you’re not 100% sure it’s all working as it should, take it to a gunsmith.
Remember, keeping the safety features of your SIG Nightmare Carry in top shape is super important for safe shooting.
Need more help? Check out the SIG SAUER official website for manuals and support. Or, for tips and advice from other gun owners, swing by the r/guns subreddit on Reddit.
Aiming Problems
Tried taking a perfect shot but your aim was off? Might be the sights messing up.
The back sight can get stuck or move on its own, making aiming as hard as hitting a moving target. Keeping sights steady is important for good shots.
Solution
Getting your sights just right is key. Start with grabbing the correct tools that fit your SIG perfectly. This way, you won’t mess up your sights or cause any damage while adjusting.
If adjusting doesn’t fix things, consider looking into aftermarket sights. There are loads designed for easy adjustment that fit snugly and stay put, helping you keep your focus on shooting, not on fiddling with your sights.
Not too keen on adjusting them yourself? That’s totally fine. A gunsmith can help dial in those sights perfectly, making sure you’re hitting your mark.
Slide Moving Issues
Sometimes, after firing, the gun’s slide pulls back more than necessary. Facing such a problem? This extra motion, called overtravel, might not seem like much at first.
However, over time, it can lead to wear and affect shot accuracy. Essentially, the slide is taking a longer trip back than it should, adding unnecessary strain on the firearm.
Solution
Alright, let’s get your SIG Nightmare Carry’s slide moving smoothly again, without beating around the bush.
Clean It: Dirt’s the enemy. Take your gun apart and clean it well. Focus on the slide and where it touches the frame.
Oil Lightly: After cleaning, a bit of oil on the slide tracks can work wonders. But keep it light; too much oil attracts dirt.
Spring Check: Your recoil spring can get tired. If it looks worn or doesn’t match the manual’s specs, you might need a new one.
Inspect the Rails: The rails should be smooth. Any rough spots can mess with the slide’s movement. If they look off, a gunsmith can help.
Magazine Issues: A wonky magazine can affect the slide. Try a different mag and see if that solves the problem.
Front Sight Gets Loose
Ever see your front sight shake when you’re trying to aim? Even good SIGs can have this happen.
Yep, even with SIG Sauer’s top-notch quality, sometimes the front sight can get a bit shaky. It makes aiming hard, and no one wants that.
Solution
A quick fix? Use some thread-locking compound. It’s basically a strong glue for screws. Put a little on the front sight screw, and it’ll stop it from getting loose.
For a more permanent fix, you might want to get the front sight staked. That’s when a gunsmith fixes the sight to the slide for good. It means no more wobble, ever.
Either way you go, fixing your front sight means you can aim better and hit your targets more reliably.
Sig Nightmare Carry: Key Features, Specifications, and Essential Maintenance Guide
| Feature | Specification | Maintenance Tips |
| Caliber | .45 ACP | Regularly clean the barrel after each use to maintain accuracy and prevent buildup. |
| Barrel Length | 5 inches | Inspect for wear and ensure the barrel is lubricated every 500 rounds. |
| Frame Material | Stainless Steel | Wipe down the frame with a clean cloth and use a mild solvent to remove residue. Check for rust periodically. |
| Grip | G10 | Check grips for damage or wear monthly. Tighten screws as needed. |
| Capacity | 8+1 Rounds | Clean magazine internals and springs every 1,000 rounds to ensure reliable feeding. |
| Sight | SIGLITE Night Sights | Clean sights with a soft cloth to maintain visibility. Adjust or replace as necessary for accuracy. |
| Weight | 41.6 oz (Unloaded) | Balance cleaning and lubrication to maintain the optimal weight and handling characteristics. |
| Trigger | Single Action | Perform a trigger function test during each cleaning session. Lubricate trigger mechanism every 2,000 rounds. |
| Safety Features | Thumb Safety, Grip Safety | Check safety mechanisms monthly for proper function. Apply light lubrication bi-annually. |
Maintenance Schedule:
- After Each Use: Clean the barrel and check for any immediate issues with functionality.
- Every 500 Rounds: Inspect the barrel for wear and lubricate.
- Every 1,000 Rounds: Clean magazine internals and inspect the overall gun for wear.
- Every 2,000 Rounds: Lubricate the trigger mechanism and conduct a thorough cleaning of the entire firearm.
- Bi-Annually: Apply light lubrication to safety features and conduct a detailed inspection of all components.
General Tips:
- Always store the Sig Nightmare Carry in a dry, clean environment to prevent rust and corrosion.
- Use only recommended lubricants and cleaners to avoid damaging the firearm’s materials.
- Familiarise yourself with the SIG Sauer’s guidelines for maintenance and care specific to the Nightmare Carry model.
Conclusion
The SIG Nightmare Carry might have a couple of issues, but really, once you know how to handle them, it’s all good. Keeping it clean, changing parts when they need it, and asking for help when you’re unsure makes a big difference.
Having this gun is about liking all the cool stuff it does and fixing the small issues. Put in a little work and care, and your gun will be reliable for years.
Whether you’re shooting at the range or using it for safety, getting past those little problems shows the SIG Nightmare Carry is a top-notch gun, all thanks to the quality SIG SAUER sticks to. Good luck with your SIG Nightmare Carry.
FAQs on the SIG Nightmare Carry
How much does the SIG Nightmare Carry cost?
The price of a SIG Nightmare Carry can vary depending on where you’re buying it and any additional features or customizations. Generally, you can expect the price to be in the range of $900 to $1,200. It’s always a good idea to shop around or check with local dealers for the most current pricing.
Are Sig 1911s accurate?
Yes, Sig 1911s are known for their accuracy. They’re built with tight tolerances and precision engineering, which contribute to their reliable performance and pinpoint accuracy. Many shooters appreciate the Sig 1911’s smooth action and consistent shot placement.
Does Sig Sauer make a revolver?
Yes, Sig Sauer has produced revolvers. One of their notable models is the Sig Sauer P320, which is actually a semi-automatic pistol but features a modular design that has intrigued revolver fans. However, Sig Sauer is primarily known for its semi-automatic pistols and rifles.
What is a Fastback 1911?
The “Fastback” feature on a 1911 refers to the design of the pistol’s grip. Fastback 1911 models have a rounded, or “bobbed,” grip that allows for easier concealment and a more comfortable fit in the hand. This design feature helps to minimise printing when the pistol is concealed and provides a smoother draw from under clothing.
Where can I find replacement parts for my SIG Nightmare Carry?
Replacement parts can be obtained through SIG Sauer directly or authorised dealers. Always use genuine SIG Sauer parts for replacements to ensure the best fit and function